STEIN COPIOUS A-TEC Sewn Eye Sling
Arborists realise and understand the virtues of climbing on friction hitches.
Many of these hitches require friction cords with different lengths and properties and are essential to have sewn terminations to allow the hitch to be dressed on the supporting hardware correctly. Friction cords which contain elements of Polyester require rigorous inspection on a regular basis before, during, and after each climb. STEIN A-TEC accessory cord is a construction consisting of a polyester/technora cover and a polyester core makes this rope highly abrasion resistant, grippy, and heat resistant. Independently Tested in configuration with STEIN Climbing Lines ACR16 / ACR24 / ACR32.
Failure to follow the rope care guidelines issued with the rope outlining the correct use and care may give rise to a situation that could endanger the user’s life. The manufacturer cannot be liable for the abuse or misuse of safety equipment. All risk is the responsibility of the user.
Before use, a detailed risk assessment must be carried out by a competent person to establish that this is the correct product suitable for the type of work being undertaken; your anchor point conforms to industry standards and meets the requirements of CE EN795 (B), potential fall distance, obstructions, and rescue systems have been addressed. Purchasers and users should seek professional training from a fully qualified and competent instructor prior to engaging in any activity using this equipment. If you are not able, or not in a position to assume this responsibility, do not use this product. The manufacturer its distributors and retailers do not accept any liability if users do not follow the instructions correctly. Prior to each use, a complete risk assessment must be carried out to ascertain that this product configures with and is appropriate to the work being undertaken.
Certified to EN795(B):2012 as a finished product - Both CE & UKCA Certified
STEIN A-TEC Accessory Cord has been independently tested to CE EN564 Mountaineering equipment - Accessory cord. The EN564 standard however only allows for full Certification of cord up to 8mm in diameter!
We Also Recommend
- choosing a selection results in a full page refresh