Husqvarna 525HE4 Petrol Pole Hedge Trimmer

Features:

• The X-Torq engine design increases torque over a wider rpm range providing maximum cutting power.
• The engine and starter have been designed so the machine starts quickly with minimum effort. Resistance in the starter cord is reduced by up to 40%.
• Adjustable cutting bar for greater versatility and less tiring work.
• Long cutter bar for extended reach.
• Stop switch automatically resets to the ON position for trouble-free starting.
• The stand-alone starter makes it easy to change the starter cord if needed.
• The rear impact guard protects the engine from wear and damage.
• Cutter bar in transport mode for easy transport and storage.
• The choke and purge are easy to reach and understand.
• Fuel pump designed for easy starting.
  
  

Technical Specification:

• Cutting speed - 4300 cut/min
• Cylinder displacement - 25.4 см³
• Power output - 1 kW
• Maximum power speed - 8500 rpm
• Fuel tank volume - 0.5 l
• Fuel consumption - 0.6 kg/h
• Idling speed - 3000 rpm
• Spark plug - Husqvarna HQT-2
• Exhaust emissions (CO2 EU V) - 1141 g/kWh [1]
• Knife adjustment range, up/down Down - 90°
• Knife adjustment range, up/down Up - 45°
• Knife Length - 60 cm
• Teeth opening - 30 mm
• Weight - 6.3 kg
• Sound pressure level at operators ear - 95 dB(A)
• Sound power level, guaranteed (LWA) - 107 dB(A)
• Gear ratio - 1
• Equivalent vibration level (ahv, eq) front handle - 4.6 m/s²
• Equivalent vibration level (ahv, eq) rear handle - 3.9 m/s²
  
  

[1] This CO2 measurement results from testing over a fixed test cycle under laboratory conditions a(n) (parent) engine representative of the engine type (engine family) and shall not imply or express any guarantee of the performance of a particular engine.