Hozelock Aquatics Stepped Hosetail 1 1/4" BSP

Stepped hose tails are used to reduce the internal size of the hose.

Fits various hose types, 20mm 25mm, 32mm and 40mm just cut off the size not required for maximum flow to enable a slightly smaller pipe to fit the connection. The BSP male theaded connection is 1 1/4 inches (32mm). 1427 has a 1 1/4" (one and a quarter) inch BSP thread which measures approximately 40.5mm OD (about 1.6in) outside diameter.

NOTE: Any thread concerning pipework that has the denomination “BSP” is sized on the bore of the pipework that the fitting is used on. But the thread will be on the outside diameter of the pipe and so will be bigger.